AD-C8T-ZB
8-inch, 2-way, zero bezel
特長
- Zero bezel design for the needs of modern applications
- Consistent tonal characteristics across the entire AcousticDesign Series for surface, ceiling, and pendant applications
- DMT（Directivity Matched Transition ™ ）導波管は、カバーエリア全体で滑らかで均一な周波数特性を保証します。
- スナップフィットマグネットグリル
- 3x ダブルステップ、ロングトラベル ドッグイヤー ブラインドマウント システム
- Intrinsic Correction™ voicings available via the Q-SYS Platform including CX-Q amplifiers
- 傷のない取り外し可能なロゴ
- 取り外し可能な電線カバープレートは、プリインストール配線用のアクセサリーとしても利用可能
- UL1480およびUL2043認定
- Available in white (RAL 9003), with black grille accessory sold separately.
仕様 | AD-C8T-ZB |
LF Ltransducer | 8 in (203 mm), 2.0 in. (50.8 mm) voice coil, ferrite |
HFトランスデューサー | Coaxial compression driver, 1.5 in (38.1 mm) voice coil |
エンクロージャー構成 | Two-way, ceiling loudspeaker, Bass Reflex |
System Bandwidth (1) | -3 dB: 70 Hz - 20 kHz |
Sensitivity (2) | 92.5 dB @ 1 W/1 m |
指向 | 90°コニカルDMT |
Max SPL (continuous) (3) | 114 dB |
Max SPL (peak) (4) | 126 dB |
Max SPL (calculated) (5) | 121 dB |
Power rating | Continuous power 200 W @ 8Ω, rated Power 400 W |
Bypass Impedance | 8 Ω |
Minimum impedance | 6.8 Ω @ 291 hz |
Transformer taps (70v/100v) | 25 W, 50 W, 100 W, 200 W / 50 W, 100 W, 200 W |
エンクロージャーの材質 | ABS baffle on powder coated steel back-can |
エンクロージャーの色 | Black back-can, white grille (RAL 9010) |
コネクター | 4-pin 0.2 in (5 mm) Euroblock connector with parallel output |
寸法（HxWxD） | 13.5 x 13.5 x 13.75 in (342.9 x 342.9 x 349.25 mm) |
Cutout dimensions | 305 mm |
出荷寸法（H×W×D） | 19.5 x 17.5 x 32 in (495.3 x 444.5 x 812.8 mm), pair packed |
重量 | 23.7 lb (10.75 kg) |
出荷重量 | 69.5 lb (31.5 kg) |
付属品 | Tile rails & screws, tile rings, cardboard cutout templates, wire connector, white grille |
Optional accessories (sold separately) | AD-MR8 (pre-install mud ring), AD-C245BG-BK black grille |
Ingress Agency | IP-44 |
保安庁 | UL1480A, UL2043, NFPA 90A, NFPA70 suitable for use in air handling spaces. ROHS, CE compliant. Baffle meets UL94-V0 flamibility rating; in accordance with IEC60849 / EN60849 systems. |
*IEC268 noise with Q-SYS amplifier limiters
1Default voicing, No sub High Pass, Smoothed
21 W/1 m, Averaged on 200-10 kHz (System), 200-2 kHz (LF) or 1k-10 kHz(HF)
3 Used for simulation. Measured 1m on-axis in free space after 1mn. Pink noise 12 dB crest Factor into RMS protection, Z weight, RMS value
4-Same as Continuous SPL +12 dB CF
5Provided for reference with former specs, Calculated from continuous noise power and sensitivity +6dB, default horn
6Max voltage during 2 h without transducer permanent damage. Protection voltage may be lower.