Features Optimized design for smaller cinemas - up to 55 ft (16.6 m) in length 3-way selectable, bi-amplified or full passive screen channel system Heavily braced, MDF low-frequency enclosure for extended bass response 6.5 -inch horn loaded midrange driver provides highly articulate dialogue Very shallow 14.5 -inch (368 mm) depth...
Features SB-7118 features a 750 W, 18-inch transducer Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts SPECIFICATIONS SB-7118 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...
Features SB-7218 features dual 700-watt transducers Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts SPECIFICATIONS SB-7218 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...
Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...
Features Higher power handling at standard ceiling heights to enable high-energy venues Consistent tonal characteristics across the entire AcousticDesign Series let you mix and match form factors across your venue Snap-fit magnetic grille 3x double stepped, long travel dog-ear blind mount system Advanced Intrinsic Correction™ voicings...
Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...
Features Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads. ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost. Bridgeable outputs...
Features 6.5-inch weather treated woofer 105° conical DMT coverage Maximum peak SPL 116 dB (16 Ω) Directivity Matched Transition ® (DMT) ensures smooth, uniform frequency response over the coverage area X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time Advanced...
Current Slide: 1 / 1 Key Features Q-SYS Extension enables integration existing Q-SYS PA Router functionality in Q-SYS Designer Software Bi-color (red/green) Ready, Busy, and Zone Status LEDs can indicate zone and system status, driven by the PMS controller Convenient rear panel switch allows the use of either dynamic or phantom powered...
Features High performance in a small package Directivity Matched Transition ® (DMT) provides balanced sound between woofer and horn 8" (200 mm) woofer with 2" (50 mm) voice coil 1.4" (35 mm) titanium diaphragm compression driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW...
