Q-SYS NVM-302D Network Video Decoder

The networked video decoder shall be a Q-SYS native Mediacast video endpoint that receives IP video streams from one or more encoder endpoints and outputs HDMI video and audio to a connected display. The decoder shall be managed, configured, and monitored exclusively through the Q-SYS platform using Q-SYS Designer Software and a Q-SYS Core processor.

The decoder shall provide one HDMI 2.0b output capable of driving video formats up to 4K60 4:4:4 (3840×2160 at 60 Hz, 8-bit, YUV 4:4:4). Supported output resolutions shall include UHD 4K (3840×2160), DCI 4K (4096×2160), ultrawide formats (3440×1440, 2560×1080), HD (1920×1200, 1920×1080, 1280×720), and SD (720×480, 720×576). The HDMI output shall support HDCP 2.3 and HDCP 1.4 content protection. The decoder shall include a video scaler for matching the output to the attached display's native resolution. The decoder shall support 8-channel PCM audio output via the HDMI connection, routable within the Q-SYS audio network.

The decoder shall provide one USB-C device port and two USB-A ports for connection to a computer and USB HID device routing. The USB ports shall provide 5V DC at 900 mA total, shared across all USB interfaces.

The decoder shall provide one RS-232 serial control port via a 3-pin Euro connector and one IR transmitter output via a 3.5 mm mini jack connector for integration with external devices.

The decoder shall have one RJ-45 LAN port compliant with 1000BASE-T and 2.5GBASE-T Ethernet. The decoder shall be powered exclusively via Power over Ethernet (PoE+, Type 3, Class 4). The decoder shall consume a maximum of 22 W (75 BTU/hr).

The decoder shall integrate natively with the Q-SYS ecosystem for network discovery, configuration, signal routing, firmware management, control, and monitoring. The decoder shall support NVM Zones for flexible, logical groupings of endpoints and sources.

The decoder shall have an operating temperature range of 0°C to 40°C, a storage temperature range of −20°C to 70°C, and a maximum relative operating humidity of 90%, non-condensing. The decoder shall measure 7.3 × 5.2 × 1.2 in (185 × 131.5 × 30.5 mm) and shall weigh no more than 1.75 lbs (794 g). Versatile mounting hardware shall be included, supporting rack mounting via the Q-SYS NV Rack Mount accessory and surface mounting to a wall or other hard surface.

The networked video decoder shall be the QSC Q-SYS NVM-302D.