The network video endpoint shall have one HDMI 2.0 connection and one LAN/PoE+ connection. The endpoint must support video distribution for formats up to 3840x2160p60 4:4:4. It must have a dimmable LED.  

The network video endpoint shall use Q-SYS Shift™ data compression to ensure high-quality and low-latency network video transport of video formats up to and including 3840x2160p60 with 4:4:4 chroma sampling. It shall support HDCP 1.4 & 2.3 and encrypt video transmission on the network.  

The endpoint shall be powered by PoE Type 2, Class 4 from a capable network switch or midspan injector.  

The network video endpoint shall operate natively on a standard gigabit Ethernet infrastructure available from a broad range of network infrastructure manufacturers, employing DiffServe quality of service (QoS), IGMP, IEEE 1588-2008 (PTPv2) precision time protocol, UDP/IP audio, and video transport with floating point format audio data representation. The endpoint shall support 802.1x authentication. The endpoint shall communicate with the system audio processor without needing AES67, Dante, or Media Stream receiver components.  

The product shall measure 4.06 x 3.43 x 2.64 in (103 x 87 x 67 mm). It shall be white, with an optional accessory to convert to black.  

The network video endpoint shall be the Q-SYS NV-1-H-WE.